Swarm
The Swarm combines a pearlized PowerKoil 18 coverstock
with the new medium RG Honeycomb core to create a strong skid/snap ball
reaction. With its pearlized surface the Swarm delivers good length on
all but the driest lane conditions combined with a aggressive and
angular breakpoint.
Technology
Aggressive Reactive Coverstock: PowrKoil 18 coverstock is
a proven performer that has probably been on more bowling balls than any
other Reactive coverstock in the bowling industry. PowrKoil 18 has been
used on some of Brunswick’s most successful balls including the Danger
Zone, Red Alert and BVP Nemesis. Aggressive in the oil and strong off
the dry, PowrKoil 18 is a perennial favorite among all styles of
bowlers.
Medium RG Honeycomb Core: The Swarm uses Brunswick’s new
Multi-Sided Honeycomb Core System which incorporates a honeycomb of high
and low density fillers to create an optimum medium RG match-up for length
and angularity. The Swarm’s medium RG helps push the ball through the
mid-lane, creating a buzz at the breakpoint that stings the pins.
High Gloss Polish Finish: The Swarm is finished with
Brunswick’s High Gloss Polish Factory Finish. This finish works
beautifully with PowerKoil 18 to create length and a angular back-end.
Utility
•Out of the Box: With its High Gloss Polish finish the
Swarm will match up well on medium-oily to medium-dry lane conditions.
• When Dulled: The Swarm’s hooking action will increase and its arc
will become more even, creating a better match-up for oily lane conditions
and help blend the over/under reactions seen on wet/dry lane conditions.
Reaction Setup
The Swarm can be drilled using the standard drilling techniques developed
for two-piece balls, see the drilling instructions link below for reaction
characteristics and layout details.
The Swarm is finished with Brunswick’s Factory Finish High Gloss
Polish. To bring your Swarm back to its original factory finish
sand the surface to 400-grit then use Brunswick’s Factory Finish
High Gloss Polish. Available from your local Pro Shop. |